Main Page

From HDX Wiki

Jump to: navigation, search

Introducing HDX Networked Media Tank

Developed and manufacture by HD Digitech, we aim to make a difference by providing high quality and reliable products through our strigent quality control. The HDX player is powered by Syabas Networked Media Tank middleware which provide amazing amount of flexibility and yet affordable.

What is the Networked Media Tank (NMT) ?

The NMT is a product developed by Syabas Technology that combines Digital Media Adaptor (DMA), NAS, Media Server and Torrent downloader in a single lower cost device. Some versions will include DVD and BluRay playback capability.

Frequently Asked Questions (FAQ) about HDX Player

Contents

Getting Started/ Pre-Sale Question

Where can I buy a HDX Player?

You may purchase directly from our webstore or from any of our authorized reseller listed in our "where to buy" page.

Why do I need an HDX player?

If you have a large media collection and would like to view it on your plasma/projector/home theater system. This is one of the most cost-effective ways to avoid investing in a HTPC. You can stream music, pictures and most importantly videos. The new generation NMT supports H.264 video which is a compliant 1080p HiDef codec used by Bluray and HD-DVD.

What do I need in order to play back from HDX Player

There are several streaming options available for HDX play back.

  1. Install Myihome provided by Syabas - http://www.networkedmediatank.com/download/myihome.html
  2. Install Llink provided by Lundman - http://www.lundman.net/wiki/index.php/Llink
  3. Connect to your PC via NFS / SMB network connection.
  4. Connect to your NAS via NFS / SMB / UPNP AV.
  5. Install an internal HDD/external HDD.
  6. Hook up an external DVD ROM (for non-css encrypted DVD only)

How do I connect my HDX player to my home theater system?

  1. You need to have a coaxial cable and plug it into any of the coaxial inputs of your AVR (Audio Video Receiver). Make sure that your HDX Player is setup to output as Digital PCM for whatever audio codec. For example, AC3 needs to be setup to Digital PCM for your AVR to detect as AC3 signal.
  2. The HDX player supports an HDMI connection as well, if your AVR supports HDMI, you can connect to it directly.
  3. There is a 2 channel RCA stereo output available for your 2 channel amp or simply hook it up to your TV if it does not have HDMI connection.

Do I need to install an internal hard disk in order to use HDX Player?

  1. No, you can stream movies/music/pictures from your PC or NAS (network attached storage).
  2. You can attach an external USB storage device which contains the media.

Network Performance and Support

What are the supported file system for HDX Player?

File system read supported: EXT2/3, NTFS, FAT16/32, HFS+

File system write supported: EXT2/3.

How should I configure the network for my HDX player?

Under current firmware releases you really should only use "manual IP" mode and not "automatic". There is a bug where the NMT doesn't correctly store your network's supplied DNS (domain name server) IP addresses and so the internet services (Media service portal, saya TV, youtube, etc.) will probably NOT work correctly if you don't enter your own "manual IP" settings. From main screen choose setup -> network -> mode...change to "manual IP"...click on [save].
Next choose [configure IP] button and check the IP numbers in each field. For the two DNS fields you should use either the DNS IPs supplied by your ISP (Internet service provider) or the internal IP address of your home router.

What type of network sharing does the NMT built-in NAS support?

SMB, FTP, NFS

What streaming speeds should I expect from the various network connection methods?

  • SMB: ~38Mbps
  • NFS: ~33Mbps
  • HTTP: ~42Mbps (same clip peaks at 47Mbps)
  • USB HDD: ~ 42Mbps
  • USB DVDROM (8x): ~42Mbps
  • Internal HDD: ~42Mbps

Note that filetransfer from PC USB host to HDX USB internal HDD is well in excess of 300 Mbps (30 MBytes/s).

What is the best network connection for playing back high bitrate content?

Looking at the above chart, HTTP will be the preferred method for streaming. However, HTTP protocol does not support .iso/.ifo format at the moment. The next best choice is NFS.

Why can't I view my DVD .iso file using MyiHome?

Myihome does not support DVD playback. Please use SMB/NFS for playback instead.

I am experiencing video/audio dropouts when playing some high bit rate contents.

  1. Try using an NFS/HTTP connection. They are the streaming protocols that offer the highest streaming speed.
  2. Make sure that you do not have a problem with your network connection. If you are using WIFI, try switching to a wired connection to test it out.

How do I add SMB/NFS shares?

  1. Setup SMB share: Goto Setup->Media Server->Network Share, you can browse your SMB network and add the path to the list, or manually enter the path to your SMB share, e.g. smb://<hostname or ipaddr>/foldername
  2. Setup NFS share: Goto Setup->Media Server->Network Share, type in the full path to your NFS share, e.g. nfs://<hostname or ipaddr>:/foldername (note the colon after hostname

With firmware 01-15-080330-14-POP-402 or newer you can select the protocol (TCP or UDP) used for the NFS connection:

  • "nfs://" = udp
  • "nfs-tcp://" = tcp

Some firewalls, including the WinXP firewall, will block critical parts of udp NFS server connections, even if correctly configured. If you experience a "No content found" error when using udp, try switching to tcp.

How do I get NFS/SMB/UPNP AV Server functions from the NMT?

You need to install an internal HDD and the NMT apps in order to get the following servers:

  1. SMB server
  2. NFS server
  3. UPnP AV server
  4. myiHome server
  5. FTP server
  6. Torrent downloader

The default username/password for remote access and FTP is

username:ftpuser password:1234.

The default username/password for SMB access is

username:nmt password:1234

the share name is share

Does the HDX player support wireless streaming?

Yes, the HDX player supports wireless streaming by plugging a compatible wireless USB adapter.

What model of wireless USB adapter does the HDX supports?

Currently, the only supported wireless USB adapter is TPlink WN821N Wireless N USB adapter.

Remote and Keyboard

Remote Walk-Thru

Section A

Power Button

  • Press Power - Standby

File Mode

  • To be confirmed - future enhancement to enable file copy function

Setup

  • Menu Screen - Access setup page directly
  • Movie playback - Adjust Brightness, Contrast settings etc
  • Setup + Play turns off 'Lock settings' option

Suspend

  • To be confirmed

Page Up

  • Menu Screen - Page up the file list
  • Movie playback - Volume Up

Page Down

  • Menu Screen - Page down the file list
  • Movie playback - Volume Down

Mute

  • Mute Audio

TV Mode

 !!!PLEASE WAIT TWO SECONDS BETWEEN PRESSING THE KEYS!!!
  • TV Mode + 0 = Auto TV mode (Please use it only for FAILSAFE)
  • TV Mode + 1 = Composite NTSC 480i
  • TV Mode + 2 = Composite PAL 576i
  • TV Mode + 3 = reserved
  • TV Mode + 4 = Component 720p60
  • TV Mode + 5 = Component 1080i60
  • TV Mode + 6 = Component 1080p60
  • TV Mode + 7 = HDMI 720p60
  • TV Mode + 8 = HDMI 1080i60
  • TV Mode + 9 = HDMI 1080p60
  • TV Mode + Caps/Num = Toggles between 50/60 Hz

USB DVDROM Eject

  • To eject external DVD Rom drive

Section B

Numerics Pads

  • Menu Screen
    - You can select the corresponding number of the file list for quick jump
    - To enter alphanumberics
  • Movie playback - For xvid/dvix, skip the percentage of movie playtime. For example, pressing 1 will skip 10% etc

Section C

Return

  • Menu Screen - To return to previous menu
  • Movie playback - NA

Source

  • Menu Screen - To display the source list that are available to HDX, for example NFS, SMB, External USB, Myihome source
  • DVD Movie playback - Repeat Chapters/Title

Info

  • Menu Screen - Only works in Internal or External USB HDD/SMB/NFS source, displaying the filename\size
  • Movie playback - Show timeline, video and audio codec information

Home

  • Menu Screen - Depending on the default source, it will bring you to the Movie, Music and Picture selection screen
  • DVD Movie playback - Repeat A/B

D Pad

  • Up - Scroll up in menu screen and nagivation around the menu's
  • Down - Scroll down in menu screen and nagivation around the menu's
  • Left - partial timeseeking during movie playback
  • Right - Nagivation around the menu's
  • Enter - Executive command or playback ONLY the selected file

Section D

MENU

  • Accessing the DVD menu screen during DVD playback

PREV

  • Previous track, during movie/music playback

PLAY

  • Play back the selected files or the entire files containing in the folder

NEXT

  • Next track, during movie/music playback

Title

  • To be Confirmed

REV

  • Rewinding during movie playback
  • When playing back DVD, after pressing ZOOM button you can resize the image

STOP

  • STOP playback

FWD

  • Fast-forwarding during movie playback, continue depressing will toggle 2x, 4x and 8x fast-forwarding
  • When playing back DVD, after pressing ZOOM button you can resize the image

Repeat

  • Repeat the current selected movie or music (Not applicable during DVD playback)

Angle

  • TS with multiple PMT support, PMT switching with ANGLE key

Pause

  • Pause the current selected movie/music

SLOW

  • Step through frames of movie

Time Seek

  • Allow you to time seek the current selected media for quick jump

AUDIO

  • Depending on the media, if contain more than 1 soundtrack you can press the audio button to select accordingly.
  • During DVD playback, you can toggle through the available soundtrack

SUBTITLE

  • Turn on a subtitle by pressing "subtitle" button on the remote control
  • To select a different language after pressing "subtitle", use the "UP" key to scroll and toggle.
  • Font Size - use left and right D-pad to adjust the size
  • Color - Color selection of subtitle fonts
  • Timing Offset - use left and right D-pad to change offset
  • Lift - use left and right D-pad to change position from the bottom of screen

ZOOM

  • Toggle between: Actual Size, Fit Best or Full Screen
  • During DVD playback: allow ZOOM function.
  • During playback of dvd file: Zoom + FWD to zoom in, REV to zoom out, Stop to return to normal viewing
  • Browser Mode: Zooms Browser Page


Color Buttons

  • In File Mode:
    • Red – Video
    • Green – Music
    • Yellow – Photo
    • Blue - Other (txt, html)

Can I connect my USB keyboard to the HDX Player?

Yes, you can. These are the command keys:

In Browser Mode

  • ESC (Open/Close)
  • F1 (Play), F2 (Stop), F3 (PrevPage/Return), F4 (NextPage), F5 (Refresh), F6 (URL)
  • F7 (Setup), F8 (Time), F9 (Red), F10 (Green), F11 (Yellow), F12 (Blue)
  • PrtSc (Info), Pause (Select), Insert (Copy), Delete (Backspace), Backspace (Backspace)
  • Home (Home), End (TV Mode), Page Up (Page Up), Page Down (Page Down), Tab (Tab)
  • Window (Source), Menu (File), Alphanumeric, Symbol and Arrow

During video playback

  • Q = Prev
  • W = Play
  • E = Next
  • A = FR
  • S = Stop
  • D = FF
  • X = Pause
  • C = Slow

VOD/DVD mode

  • ESC (Open/Close)
  • F1 (Play), F2 (Stop), F3 (Prev), F4 (Next), F5 (FR), F6 (FF), F7 (Slow)
  • F8 (TimeSeek), F9 (Repeat), F10 (Audio), F11 (Subtitle), F12 (Zoom)
  • PrtSc (Info), Scroll (Menu), Pause (Pause), Page Up (Vol+), Page Down (Vol-)

How do I test my remote control?

First, make sure the batteries are functional, then point the remote control towards a digital camera such as a Canon IXUS or a mobile phone camera. When you watch the remote control through the camera you should see a white flash when pressing a button.

Can I use a universal remote control for the HDX?

Yes, you can. You need to obtain the remote control codes from the manufacturer.

What device is the HDX listed under in Logitech Harmony Remote Software?

Device > Computer > Media Center > HD Digitech > HDX-1000 (Finally!)

(older solution) Media Center > Syabas > PopcornHour A-100 (100% compatible with HDX player)

Where do I find the remote control codes for Popcorn hour?

Visit here http://www.popcornhour.com/download/ph_a100-rc.jpg

Where do I find remote codes for JP1 remotes?

Try this Popcorn Hour Keymap Master file.

Remote Code for Philips Pronto

See the Philips Pronto Remote Codes wiki page.

HDX Hardware Questions

How to setup wireless USB adapter (TPLink WN821N)

  1. plug in to the USB port above the LAN connectors
  2. turn on your HDX 1000, wait for it to boot up successfully.
  3. Navigate to setup -> network
  4. Under Mode -> chosed Wireless Manual or Auto IP (depending on your preference)
  5. Move down to wireless config.
  6. Scan for a list of available SSID, select your own SSID. (make sure its broadcast)
  7. choose the security level for your router and enter the key.
  8. click SAVE, and once you return to the network screen. It will show the status of WIFI Connected.

Help, my TV is not getting any signal from the HDX 1000 connected via HDMI

This is likely due to HDMI handshaking issue with your TV. To workaround this follow the below steps.

  1. Turn of the HDX 1000 and unplug the HDMI cable
  2. Connect the HDX 1000 via composite video (yellow socket) to your TV
  3. Turn on the HDX 1000 and select composite input according to your TV specification.
  4. Wait for the RED LED (bootup sequence) to turn BLUE. You should see the HDX 1000 menu screen.
  5. Goto setup -> audio and video -> select the HDMI resolution suitable for your TV and SAVE.
  6. Turn off your HDX 1000, connect the HDMI cable and turn back on.
  7. Your TV should receive signal from the HDX 1000.

Why I can only get one USB port above the LAN connectors working? (HDX 1000)

The HDX 1000 card reader utilizes one USB port internally, hence there is only one useable external USB port. The 1st USB port (top USB port) can be used to supply power to, for example, your external HDD.

How do I fully shutdown the player?

Use the power on/off button!

How do I reset the player?

There is no reset button on the HDX player. You can use your remote to reset your HDX player instead of using the power button.

  • Press Power + Eject button

Can I plug in an external DVD rom?

Yes you can, the USB port can support an external DVD rom. However, the sigma 8635 chip does not support CSS encryption. Your DVD must not be CSS protected.

Can I eject the external DVD rom by using the remote?

Yes, there is an eject button on the remote.

Can an external USB HDD function like an internal HDD?

A USB HDD will not have same functionality as an internal drive. An internal drive is considered a non-removable drive that allows NMT apps to mount, but a USB HDD is considered a removable drive so the NMT is not able to dynamically mount and unmount the NMT apps.

What are the TV-mode shortcut keys command?

 !!!PLEASE WAIT TWO SECONDS BETWEEN PRESSING THE KEYS!!!
  • TV Mode + 0 = Auto TV mode (Please use it only for FAILSAFE)
  • TV Mode + 1 = Composite NTSC 480i
  • TV Mode + 2 = Composite PAL 576i
  • TV Mode + 3 = reserved
  • TV Mode + 4 = Component 720p60
  • TV Mode + 5 = Component 1080i60
  • TV Mode + 6 = Component 1080p60
  • TV Mode + 7 = HDMI 720p60
  • TV Mode + 8 = HDMI 1080i60
  • TV Mode + 9 = HDMI 1080p60
  • TV Mode + Caps/Num = Toggles between 50/60 Hz

How do I play all the files in the same folder?

Press PLAY to play all files in the folder. Pressing ENTER will play only the single file highlighted

There is no video signal detected with HDMI connection during initial setup.

  1. Unplug the HDMI cable from HDX Player after you have shut down.
  2. Power up the HDX player, you should see a RED LED.
  3. Wait for 3~5 mins
  4. On the remote, press TV mode release, followed by 7 (720p) or 8 (1080i)
  5. plug the HDMI cable, your TV should resync itself

Remember to save the changes under Audio/Video Setup

Can I upgrade HDMI 1.1 to HDMI 1.3 via a firmware update?

It is not possible to upgrade the HDMI from ver 1.1 to 1.3 via a firmware upgrade due to hardware limitations.

How do I copy files from external USB flash/ HDD to the internal HDD?

Try browsing to a file, select it by pressing the "Angle" key, a tick will appear beside the file icon. You can select multiple files,.

Browse to your destination (internal HDD should work), and press "Time Seek" key to start the Copy process.

Later, various file operations will be implemented more elegantly and grouped under the "File Mode" keys.

How do I copy files from internal HDD to the external USB flash/ HDD?

Try browsing to a file, select it by pressing the "Angle" key, a tick will appear beside the file icon. You can select multiple files,. Browse to your destination , and press "Time Seek" key to start the Copy process. external USB flash/ HDD - files system FAT16,FAT32,EXT2,EXT3 - ok! NTFS - only read Later, various file operations will be implemented more elegantly and grouped under the "File Mode" keys.

Is there any way I can copy files to the HDX player internal hard disk without using FTP?

Yes, Hi-Jack from MPC has created a great guide for this purpose. (workable with HDX as well)

http://www.mpcclub.com/modules/Club_Area/Documents/Fast_Copy_with_PoPCorn_Hour.pdf

My PC does not detect the HDD after plugging into the USB slave port (HDX 1000)

This is because the internal Hard Disk is formatted with ext3 filesystem.

Simply follow the guide available at http://www.networkedmediatank.com/showthread.php?tid=12176&pid=103699&#pid103699


TV mode shortcut key does not work, is there another way to reset the video output?

Yes, you may access the system configuration menu by entering in your browser, http://ipofhdx:8883/display.html


Does the HDX 1000 supports S-Video?

Although the HDX 1000 does not have an S-Video (Y/C) connector, the S-Video signals are present on the backplane of the HDX 1000. A special cable has to be build for this. Connect the Y (luminance) to the component-Y (green) connector and the C (chrominance) to the composite (yellow) connector. The tv-mode must be set to component-576i for PAL or component-480i for NTSC.

NMT Firmware Update

Steps to install NMT Apps

  1. Install your harddrive as describe in the HDD installation guide.
  2. Download the NMT apps from the download section
  3. unzip and rename filename *.nmt to syb8634.nmt
  4. copy the file syb8634.nmt to the ROOT directory of your USB stick
  5. plug the USB stick to the USB port above the LAN connector.
  6. In your HDX 1000, navigate to Setup -> Maintenance -> NMT Setup Wizard (only available if your HDD is detected)
  7. browse through the menu option, and select USB update option.
  8. The player is now installing the NMT apps.


Suggested preparation for firmware update

It is recommended to do a fresh boot up of the NMT when intending to update your firmware. This will help the device stay "clean" and prepare itself for the update.

Where can I download the NMT firmware update?

You may download from our firmware and application page. Alternatively, sign up for our news letter to be kept inform of the latest firmware development.

No update found, when using USB thumb-drive for updating firmware

Copy 3 files in the USB thumb drive ROOT... Then browse the device, choose the 4th media option (not video, not audio... choose "text") and then select the html file (usbupdate.html)

Steps to upgrade firmware (USB/Online)

  1. Stop all torrents Up/Down-Loading.
  2. Stop file copying and all the Shares. (Pull the Network cable out to be safe, for USB stick update only)
  3. Restart the unit so it's fresh, either pressing power and then Eject (Not at the same time) wait 2 Minutes until every thing is running ok. Or, you can simply press on the hardware on/off switch, wait 30-40 sec, push the plug back. When the HDX 1000 is up and running, wait one more minute to be safe.
    (For USB Update Only)
  4. Browse the USB Stick, choose the 4th media option (not video, not audio... choose "text") and then select the html file (usbupdate.html). AFTER selecting usbupdate.html you will see a white screen with the firmware version at the top of your screen. Press ENTER again and the firmware update process will begin.
    (For Online Updating)
  5. Go to setup->maintenance->Update
  6. Flash the firmware. And DON'T interfere with the flash, if it takes time then WAIT, the HDX 1000 will reboot when the flash is done.
  7. Check your firmware version by going to setup->maintenance
  8. You have successfully updated your firmware

Audio/ Video playback

Help, my video files are not playing? Is this a bug or faulty player?

Not all video files are encoded to work with the NMT, depending on the encoding of the media. You should use Mediainfo or Avinaptic to check. Being able to play on your PC does not necessarily mean that the HDX will be able to play back the same file flawlessly. If you need help, post the clip info in the forum for advice.

How do I play back FLAC using myiHome ver4.7 ?

You will have to edit the following XML files in myihome and add FLAC extension 

C:\Program Files\myiHome\webapps\ROOT\xml\music.xml 
C:\Program Files\myiHome\webapps\ROOT\application\music\xml\audioext.xml

How do I select different audio tracks for my AVI file?

Select your track, then use Time Seek to activate the changes

Does the HDX support subtitles?

Yes, currently the HDX support subtitles in the following format.

  • SRT
  • SMI
  • SUB
  • SSA

You need to rename the subtitle file to be the same name as your movie and place it in the same folder.

Does the HDX player support subtitle languages other than English?

Currently the HDX player provides support for simplified Chinese, and some other European languages.

Why doesn't my subtitle display?

Please make sure that it is in the format that HDX supports.

The subtitle file must be in the same folder as the movie file.

The name of the subtitle file must be the exact same as the name of the movie except for the extension.

Subtitle language (Setup>Preferences>Subtitle language) must be set to anything but None. Remember to save the setting.

Does the HDX support embedded subtitles in mkv?

Yes!

  1. Ensure that the embedded subtitles are supported by HDX, for example: .srt, .sub, .smi and .ssa
  2. Turn on a subtitle by pressing "subtitle" button on the remote control
  3. To select a different language after pressing "subtitle", use the "UP" key to scroll and toggle.
  4. To turn OFF embedded subtitles press 'subtitle' followed by "left" key.
  5. "Left" & "Right" changes subtitle sync.

How do I back up my DVD so that it can be played back by the HDX?

  1. You need to backup your DVD into .iso format
  2. If your movie is backed up in .img format renaming it to .iso may help.
  3. DVD support in .iso is only supported via NFS/SMB connection at this time. It will not work with Myihome. If you are having judder or audio drop out problems with SMB share. Use NFS instead.

Why can't I view my DVD .iso file using MyiHome?

Currently MyIhome does not support DVD playback. Please use SMB/NFS for playback instead.

My movies are encoded with .DTS . Why is there no sound?

On the HDX player there is no DTS downmixing to analog stereo. The HDX player passes through DTS signal via S/PDIF or HDMI digital audio to your AVR (Audio Video Reciever) for decoding. It will not down mix to stereo due to license cost. You can get a cheap DTS decoder or re-encode the movie to AC3, which is supported by decoding to PCM.

What is the best method for backing up my DVD collections? (Single layer and Double Layer)

One way is to just copy the files from DVD to your PC or NMT hard disk.

Another way is to convert the DVD to an ISO file.

The HDX1000 will play an .iso file or a video_ts directory as it were a DVD, regardless of size or single or double layer.

  • Single Layer DVD
read this ImgBurn guide on how to create a single layer ISO on your hard drive.
  • Double Layer DVD
read this ImgBurn guide on how to create a double layer ISO on your hard drive.

There are quite a large number of other tools that do a similar job.

After pressing the zoom button, the OSD does not go away by itself.

A possible work around is to hit the "enter" button on the remote to remove the OSD manually.

DTS audio keeps dropping out or stutters during playback.

This can be resolve by remuxing the .mkv file with gdsmux found in haali media splitter.

This can also be resolved by using DelayCut if the above does not work. DelayCut is incorporated in Heartwave's AudioConverter select the clean DTS option.

How do I use playlist files via myiHome?

Make sure "Scan Windows Media Player/Winamp playlist" is selected under Edit>Preferences>Music. Then browse to your myiHome share or watch folder on the HDX. Directories and all playlist files except for .pls files will be listed first in alphabetic order, followed by audio files and .pls files in alphabetic order. Note that .pls files are considered Internet Radio links and are best suited for this task.

When I play DTS wav files, I hear only noise

Make sure your receiver can decode DTS audio, that HDX is connected to the receiver via a digital optical cable, and that you set the Audio Setup options the following way: "Surround=5.1", "DTS=RAW". If you still hear noise, then your HDX "digital volume" (set via the remote) is probably not at its default value - try changing it as the DTS file is playing; once you hit the default level (38/49 for the older/newer firmware), you should hear the music playing.


How do I change the theme?

  1. Obtain _theme_.zip from release package or download from http://www.popcornhour.com/download/_theme_.zip
  2. Unzip and modify existing graphics as you wish, but maintain the dimension and filename
  3. Modify .config file in root of _theme_ folder to change the colors of the text, color attributes is same as in HTML, e.g. RRGGBB, #RRGGBB, "green", "white-alpha", "black"
  4. Copy entire _theme_ folder to the NMT harddisk's Photo folder
  5. Reboot (Power + Eject) and new theme will be loaded

Note: Screensaver images ssvr1.jpg ~ ssvr4.jpg must be less than 20Kbytes, due to current limitation.

BitTorrent client

How do I use the Transmission client?

Transmission is the alternative BitTorrent client on your NMT. It listens on port 8077. The port used for incoming connections is by default: 51413. You can change this in your NMT's settings, or in the preferences in the web interface (Clutch). This client is accepted by most private trackers.

To enter the Transmission / clutch interface, go to :

http://IP-OF-YOUR-NMT:8077<br>

Example:

http://192.168.1.150:8077

The client will by default download to "/share/Download". This can be changed in the clients web interface. At the bottom of your web interface, there is a picture of a cog wheel. Click this and a screen with Preferences will pop up.

To download to external drives, simply replace "/share/Download" with your prefered external drive.

For example, if you want to download to "USB_DRIVE_A-1", simply enter "/USB_DRIVE_A-1/" in the downloads field.

Default Username and Password:

Username: nmt
password: 1234

How do I use the BPTD client ?

BPTD is the older BitTorrent client available on your NMT. It listens on port 8883. The port used for incoming connections is by default: 8881. You can change this in your NMT's settings. (This client is banned on many private trackers because of incorrect transfer statistics.)

To enter the BPTD interface, go to:

http://IP-OF-YOUR-NMT:8883/torrent/bt.cgi

Example:

http://192.168.1.150:8883/torrent/bt.cgi

How to use NZBGet Client (Usenet)

Please refer to this very useful guide.

http://www.networkedmediatank.com/showthread.php?tid=7035

Retrieved from "http://hdx1080.com/wiki/index.php?title=Main_Page"
Personal tools